Kitchen boiler installation — Norwich
Wall-mounted boiler · pipework run neatly below · kitchen left clean
New boiler installation & replacement · Norwich & Norfolk
Boiler replacement, done properly.
Correctly specified, cleanly installed and fully commissioned — with a clear written quote and proper aftercare.
Professional home survey · written fixed quote · Gas Safe registered · no obligation
Lower energy bills
Is your old boiler sending your money up the flue?
Older boilers can waste up to 30p of every £1 you spend on gas. A modern A-rated condensing boiler turns around 92p of every £1 into heat for your home. See what that could mean for you.
1How old is your boiler?
2How big is your home?
3Your gas price
p/kWh
Default: Ofgem price cap gas rate, Oct–Dec 2026
You could save around
£219/ year
That’s roughly £4 a week back in your pocket — every week, for the life of the boiler.
£18
Per month
£2,192
Over 10 years
5.0t
Less CO₂ in 10 years
Energy Saving Trust: swapping an old G-rated boiler for an A-rated one, with new controls, could save a semi-detached home around £310–£320 a year.
Estimate only, comparing your current boiler with a new A-rated condensing boiler (92% efficient) using Ofgem typical gas use. Your actual saving depends on your home, insulation, habits and energy prices.
-
Heat recovered, not wasted
Condensing boilers capture heat from the exhaust gases that old boilers simply blow outside.
-
Turns down, not just off
Modern burners dial their output up and down to match demand, instead of blasting on and off.
-
Smarter controls
A smart thermostat and TRVs only heat the rooms you use, when you use them.
Specification
Specified for your home. Not just swapped like-for-like.
The right boiler depends on how your home actually uses heat and hot water — so we work that out before we quote.
Hot water demand
Bathrooms, showers and how often they run at once.
Property size
Heat loss and the output the home needs.
Existing system
Combi, system or heat-only — and its condition.
Boiler location
Flue route, access and whether it should move.
Controls
Programmer, smart or weather-compensating.
Future requirements
An extra bathroom or extension planned later.
Why Precision
The difference isn’t the boiler. It’s the installation.
Correct specification
Sized to your hot water demand and property, then confirmed in a clear written quote before we start.
Professional installation
Level, tidy, properly supported pipework — the kind of work an engineer is happy to photograph.
Clean, respectful working
Floors and units protected, dust kept down, everything cleared away.
System protection
Flush, magnetic filter and inhibitor as specified, so sludge doesn’t shorten the life of the new boiler.
Proper commissioning
Gas rate and combustion checked and recorded, controls set, system balanced — where reliability is won or lost.
Warranty & aftercare
Manufacturer warranty registered, servicing reminders, and a number that reaches us.
Specified properly.
Installed properly.
Real installations
Our own work, across Norwich & Norfolk
Combi replacement — Norwich
Old Vaillant out · new Baxi combi in · same cupboard, tidied pipework
System boiler & unvented cylinder
Mains-pressure hot water · new system boiler · unvented cylinder
Your options
Three levels of specification
Every option gets the same survey, workmanship, commissioning and certification. The levels differ in equipment, controls, system protection, warranty and aftercare — never in how the job is done. Your engineer recommends the right one at survey.
Essential
Standard equipment, done properly
A straightforward replacement where the system is sound.
- Correctly-sized boiler
- Flue & pipework as required
- System flush & inhibitor
- Programmable heating controls
- Full commissioning & certification
- Manufacturer warranty registered
Your exact specification is confirmed at survey.
Discuss this option
Recommended
Upgraded protection, controls & cover
The specification we fit most often.
- Higher-tier boiler
- Magnetic system filter
- Full flush & system treatment
- Smart / weather-compensating controls
- Extended manufacturer warranty
- Priority aftercare
Your exact specification is confirmed at survey.
Discuss this option
Signature
The fullest specification & aftercare
Strongest equipment, longest cover, worthwhile upgrades.
- Flagship boiler & longest warranty
- Full system protection & filtration
- Zoned / app-connected controls
- System upgrades where beneficial
- Enhanced aftercare / service plan
Your exact specification is confirmed at survey.
Discuss this optionWhat you can expect
What a Precision installation includes
The exact scope is set at survey. This is the standard every installation works to.
Professional survey
System, property and requirements assessed and the boiler correctly specified before anything is quoted.
Removal & installation
Existing boiler removed and disposed of; new boiler, pipework and flue fitted to manufacturer and Building Regs requirements.
System protection
Flushing and inhibitor as standard, magnetic filtration where specified; power flush where the system needs it.
Controls
Programmer, thermostat or smart controls fitted and set up for your home.
Commissioning
Gas rate and combustion checked and recorded, system balanced, safety checks completed.
Certification & registration
Notified to Gas Safe / Building Control, certificate issued, and the manufacturer warranty registered for you.
Handover
Controls and system demonstrated, paperwork explained before we leave.
Aftercare
Warranty support, servicing reminders, and a number that reaches us.
The workmanship
The details make the installation.
How it works
Four steps, no pressure
- 01
Tell us about the property
A few quick details and photos.
- 02
Survey & specification
We assess the system and confirm the right boiler.
- 03
Written proposal
Clear specification and fixed quotation.
- 04
Installation & handover
Installed, commissioned, certified and demonstrated.
Your boiler assessment
Request a tailored quote
A few quick questions so we can specify the right boiler and give you a genuinely fixed price. No obligation.
- Takes about a minute — one question at a time
- Josh personally reviews every enquiry
- A personal response, not an auto-reply
- Your details are never shared or sold
Price expectation
Why a boiler quote has to be tailored
No two installations are identical. These are the things that move the number.
- 01Boiler type & output — combi, system or heat-only, sized to your home
- 02Property & hot water demand — size, bathrooms, how much runs at once
- 03Boiler position — access, flue route, and whether it moves
- 04Controls — programmer through to smart, zoned or weather-compensating
- 05System condition — flushing, filtration and any pipework upgrades
- 06Relocation & system changes — moving the boiler, converting the system, adding a cylinder
We price for the system to be specified, installed and commissioned properly, with a clear written quotation before work begins. If something genuinely can’t be seen until work starts, we agree it with you first — nothing is added quietly.
From Google
What our customers say
Recent reviews from our Google Business Profile.
Wow, wow, wow! Thank you so much to Josh and the team for completely transforming my mum’s bathrooms and bringing her vision to life. From sorting out the horrendous plumbing and completely ripping out the old bathrooms and giving them a total makeover, the quality of work has been outstanding. The attention to detail, workmanship and professionalism have been second to none, and nothing was ever too much trouble. We are absolutely over the moon with the end result!! They’ve completely transformed the space into something beautiful. We couldn’t be happier and would recommend you to anyone looking for a reliable, skilled and hardworking team.
Josh has been working for me for some years now, he fitted me a new en-suite, a new boiler, an outside tap, a kitchen hot tap and annually services my boiler. I wouldn’t use anyone else. He is respectful of my home and always tidies up and is in my opinion trustworthy. So if your looking for a good tradesman look no further.
Dealt with Josh and Ayden a few times always reliable and fantastic care with their work, wouldn’t recommend anyone else!
Had a great experience with Josh, replaced my boiler, amazing job, excellent service, professional and friendly, highly recommend.
Common questions
Boiler replacement, answered
A straightforward like-for-like combi replacement is usually completed in a day. A system change, or converting an open-vented system to a modern sealed system, typically takes one to two days.
We fit established, widely-supported boiler brands, and confirm the right brand and model for your home at survey — based on hot water demand, property and budget.
Every installation comes with the manufacturer’s warranty, registered on your behalf, plus our own workmanship guarantee.
For an accurate fixed price, yes. The survey lets us see the flue, pipework, controls and system condition so your quote covers the whole job. If anything genuinely can’t be seen until work starts, we tell you upfront and agree it with you before it goes ahead — it’s never added quietly later. If a visit isn’t practical straight away, clear photos let us give you a close estimate first.
In most cases, yes. Moving a boiler adds pipework, flue and making-good work, which we assess and price at the survey stage so there are no surprises.
A thorough system flush before fitting is carried out as standard, with a magnetic filter and inhibitor added. A full power flush is available as an add-on where the system condition calls for it — we’ll tell you honestly if it does.
More questions
Yes. Removal and responsible disposal of your existing boiler is included as standard in every replacement.
Yes. We service the boilers we install to keep the manufacturer warranty valid, and send annual reminders so a service is never missed.
Thinking about replacing your boiler?
Get it specified and quoted properly — a clear fixed price, a clean installation, and a company that’s still there after the job is done.